
Document Stock
Ticket Dimensions and Perforation
88
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Figure 28 • Non gapped tickets (for printers with burst separator)
Figure 29 • Both gapped and non-gapped tickets with center track can be used
in printers ordered with center track option
Grain direction
Transport
direction
Thermal
coating
Magnetic
stripe
Stub perforation (if applicable)
Magnetic stripe must be cut
Tab s
L= 85.6 (standard as per ISO 7810)
L= 110.0 (customer special)
6 mm
Perforation not allowed
within this 6 mm wide area
Magnetic code must not
cross optional perforation
Grain direction
Transport
direction
54 ±0.2
L ±0.25 (see below)
0.6
Thermal
coating
Magnetic
stripe
Stub perforation (if applicable)
Magnetic stripe must be cut
Tabs
L= 85.6 (standard as per ISO 7810)
L= 110.0 (customer special)
6 mm
Perforation not allowed
within this 6 mm wide area
7.0 mm
15.82 min.
1.0
Magnetic code must not
cross optional perforation
Comentários a estes Manuais