Zebra Z4M Manual do Utilizador Página 62
- Página / 102
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
54 Zebra Z4M Printer User’s Guide
Display Shows Action/Explanation
LANGUAGE
Selecting the Display Language Press the INCREMENT (+) or DECREMENT (-)
key to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian,
Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japan
This parameter allows you to change the language used on the front panel
display.
You have now completed the entire configuration and calibration sequence. You may either press
the SELECT key or the SETUP/EXIT key.
DARKNESS
You are now back at the first parameter in the configuration sequence.
NOTE: If you pressed the SELECT key but are through programming the
printer configuration, you may press the SETUP/EXIT key and continue
with the “SAVE SETTINGS” function.
SAVE SETTINGS
Save Settings Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: Permanent
Selections: Permanent, temporary, cancel, load defaults, load last save.
This display appears when you attempt to exit the configuration mode.
• Permanent: Permanently saves the changes, even when printer power is
turned off.
• Temporary: Saves the changes until changed again or until power is turned
off.
• Cancel: Cancels all changes since you entered the configuration mode
except for darkness and tear-off position (if they were changed).
• Load defaults: Loads factory defaults.
• Load last save: Loads the values from the last permanent save.
PRINTER READY
Press the SETUP/EXIT key to activate the displayed choice.
You have exited the configuration and calibration sequence and are now ready
for normal printer operation.
- Customer order # 77965L 1
- Zebra Z4M Printer 3
- Table of Contents 5
- Specifications 8
- Appendix 8
- Unpacking and Inspection 9
- Media and Ribbon Requirements 10
- Printer Power 11
- Printer Overview 12
- Calibrating the Printer 13
- Types of Media 14
- Figure 5 15
- Figure 4 15
- Choosing the Print Mode 16
- Loading the Media 17
- Positioning the Media Sensor 18
- Figure 7 19
- Loading the Ribbon 20
- Auto Calibration 21
- Operator Controls 22
- Configuring the Printer 23
- Printing a Test Label 24
- Establishing Communication 25
- Cabling Requirements 26
- Printer Basics 27
- Front Panel Keys 28
- Front Panel Lights 29
- Roll Media Loading 30
- Figure 14 31
- Figure 15 33
- Figure 16 35
- Figure 17 37
- Figure 18 39
- Fanfold Media Loading 40
- Figure 19 41
- Ribbon Loading 42
- Figure 21 43
- Ribbon Removal 44
- Configuration 45
- Leaving the Setup Mode 47
- Figure 22 53
- * Option required 61
- Routine Care and Adjustments 63
- Figure 23 65
- Lubrication 69
- Printhead Pressure Adjustment 70
- Figure 27 71
- Power Rewind Media Alignment 72
- Figure 28 73
- Fuse Replacement 74
- Troubleshooting 75
- Error condition HEAD OPEN 76
- Error condition RIBBON IN 76
- Warning HEAD OVER TEMP 76
- Warning HEAD UNDER TEMP 76
- Print Quality Problems 77
- Wrinkled ribbon 78
- Communications Problems 79
- Problem Solution 80
- Printer Diagnostics 81
- 1. Turn off the printer 82
- Figure 29 82
- 2. Press and hold the PAUSE 83
- 3. Release the key after the 83
- Figure 30 83
- Figure 31 84
- Loading Factory Defaults 85
- Printing Specifications 88
- Ribbon Specifications 88
- Media Specifications 89
- Bar Codes 90
- AC Power Cord 91
- Figure 35 94
- Figure 36 94
- Figure 37 96
- Pin No. Description 97
- Unpacking .................1 101
- ZPL II Programming Guide 101
Manuais e produtos relacionados com Impressoras de rótulos Zebra Z4M
Impressoras de rótulos Zebra 105SL Manual do Utilizador
(130 páginas)
(130 páginas)
Diodes AP78L05/08/12 manuály
Uživatelské manuály a uživatelské příručky pro Hardware Diodes AP78L05/08/12.
Poskytujeme 1 manuály pdf Diodes AP78L05/08/12 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais