Zebra Eltron Card Printer Guia do Utilizador Página 42

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 41
DO NOT position printing over the Smart Card
Chip
DB-9
PINS
SMART CARD
CONTACT POINTS
DB-9
PINS
SMART CARD
CONTACT POINTS
1 C1 (Vcc) 6 C6 (Vpp)
2 C2 (Reset) 7 C7 (I/O)
3 C3 (Clock) 8 C8 (RFU)
4 C4 (RFU)
9
(GND when chip
is at station)
5 C5 (GND)
Refer to the Card Printer Programmer’s Manual for complete programming informa
-
tion.
34 980261-001 Rev.C
Orient the cards with the Smart Card Chip
at the top of the card and facing away from
the printer.
When a command to the parallel printer
interface sends a card to the Smart Card
Contact Station, the printer connects the
Smart Card Contact Station to the female
DB-9 connector on the rear of the printer.
An attached external Smart Card Programmer
can be used to program Smart Card chips.
MEDIA LOADING ORIENTATION
SMART CARD CONTACT STATION INTERFACE
Vista de página 41
1 2 ... 37 38 39 40 41 42 43 44 45 46

Comentários a estes Manuais

Sem comentários