Zebra EPL2 Manual do Utilizador Página 40

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 82
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 39
g Command - Draw Graphics
Description Use this command to draw single line of a bit
mapped graphic. The bit map data pattern can
be repeated automatically, in sequence, up to
eight times. The line height is set by the H com
-
mand. The bit map image is assembled on a line
by line basis.
Syntax
¬gp
1
DATA
Parameters p
1
= Number of bytes to follow.
Values : 001 to 199
DATA = Data bytes representing the bit
mapped graphic. Each bit represents
one dot (1=black, 0=white).
Each additional line of graphics must start with
the G command and include the complete com-
mand parameter and data string
(¬gp
1
DATA).
DO NOT add carriage returns (CR) or Line Feeds
(LF)orCR/LF to the end of a Draw Graphics com-
mand line.
Sending the CR or LF or CR/LF will advance the
print position by full text line as defined by the de
-
fault or previously issued A command.
3-18
980353-001 Rev.B
Vista de página 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Comentários a estes Manuais

Sem comentários