Zebra TLP 2824 Guia do Utilizador descarregar pdf (Página 40)

Thermal-Transfer TLP Model

Before following the steps in this

procedure, open the printer by

pulling the release latches forward then

lifting the top cover. Remove any ribbon

from the carriage.

Removal

1. Grasp the print head spring and pull it

to the left; then, slide it free of the

carriage.

2. Use the spring to pry the print head

clip off the right side of the carriage.

3. Pull the print head and bracket

forward.

4. Use a #2 Phillips driver to remove the

screw that holds the ground wire.

5. Unplug both bundles of print head

wires from their connectors.

32 980485-001A

MOVIE

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Comentários a estes Manuais

Sem comentários