Zebra TTP2130 Especificações Página 94
- Página / 132
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Default Parameter Settings
Print Setup
94
P1003640-002 TTP 2100 Technical Manual 09/28/2009
Sets the level at which the TOF sensor detects out of paper. The out-of-paper level may differ
from the black-mark level on label stock where the foil opacity indicates top of form.
This parameter is set automatically when you run the “Calibrating the TOF sensor procedure”
(manually or using ESC #).
Switches identity of the device from Printer Class (7 hex) to Vendor Class (FF hex).
This parameter is used when you want to communicate with an USB printer in Linux without
having to install a driver.
The vendor class parameter is normally 0, which sets the TTP 2130 to be a Printer Class
device. If you set it to 1, the TTP 2130 will be a Vendor Class device, which means that it will
not require a driver but will appear as a file in Linux. You can then communicate with the
printer just by writing data to, or reading from, that file.
Sets the length of the partial cuts in mm from the edges of the paper (the blade cuts from the
paper edges towards the middle).
The paper width parameter n48 is used to specify the edges of the paper so the printer knows
where to start to cut. If parameter n48 is set to auto width, the setting of the TOF sensor
selector switch determines the print width and thus also the start position for the partial cut.
58
0Default
Out-of-Paper Level
0 Min
255 Max
59
0Default
Vendor Class
0 Min
1Max
Caution • When not set to “Printer Class”, no programs that rely on the Windows printer
driver will be able to communicate with the printer, and thus not be able to reset the
parameter to Printer Class again. To reset the printer to Printer Class:
1. Power OFF the printer
2. Disconnect the USB cable.
3. Open the printhead and remove the paper
4. Hold the Feed button down and power ON the printer with the printhead open.
5. Connect the USB Cable.
6. Save Parameter Settings with <ESC>&<4>.
60
10 Default
Partial Cut Length
1 Min
40 Max
Caution • A too large partial cut may cause problems with the presenter, so stay with the
default setting if possible.
- TTP 2100 1
- Technical Manual 1
- Contents 3
- Introduction 7
- Contacts 8
- Product Presentation 10
- Eject Mode 12
- Hold Mode 12
- Print and drop 12
- Print and take 12
- Controls 13
- Power Indicator 14
- Status Indicator 14
- Description 14
- Installation 15
- Paper Width Setting 16
- Value When Used 16
- 10. Select Upload One 17
- Top of Form (TOF) Sensor 18
- Calibrating the TOF Sensor 19
- Installation Considerations 20
- Orientation 21
- Push down 22
- Design Your Own Mounting 23
- Ambient Light 24
- Paper low 25
- Connector 25
- TTP 2110 26
- TTP 2130 27
- Housing: 29
- Tyco No. 350777-1 29
- Socket: 29
- Tyco No. 350689-1 29
- Making a Self-Test Printout 30
- Installing a Printer Driver 32
- Operation 33
- Temperature-sensitive 34
- SW96074C 34
- SW96075C 34
- Wrong! Wrong! Wrong! 35
- 1. Open the printer lid 36
- Programming 37
- Figure 24 • Printout Styles 38
- ESC ! n1 39
- Select font 39
- 1B 23 Hex 43
- 27 35 Decimal 43
- 1B 5A Hex 43
- 27 90 Decimal 43
- Text Commands 44
- 1B 21 n1 hex 45
- 27 33 n1 decimal 45
- 1B 42 n1 Hex 45
- 27 66 n1 decimal 45
- Software Command Syntax 46
- 1B 68 n1 hex 47
- 27 104 n1 decimal 47
- 1B 77 n1 hex 47
- 27 119 n1 decimal 47
- 0C hex 50
- 12 decimal 50
- 09 hex 50
- 9 decimal 50
- Bar Code Commands 51
- 1B 42 53 n1...n11 hex 52
- 27 66 83 n1...n11 decimal 52
- Code 128 / EAN128 53
- Name Dec Hex 53
- 1B 7C n1 nx Hex 54
- 027 124 n1 nx Decimal 54
- Graphics Commands 55
- 1B 72 n1...n9 hex 56
- 27 114 n1...n9 decimal 56
- 1B 67 n1...n5 hex 57
- 27 103 n1...n5 decimal 57
- 1B 4C n1 Hex 57
- 27 76 n1 Decimal 57
- Print Commands 58
- 1B 6A n1 hex 59
- 27 106 n1 decimal 59
- 1B 51 n1 hex 59
- 1B 81 n1 Decimal 59
- Cut and Present Commands 60
- Eject 1 mm 61
- 05 Hex 62
- 5 Decimal 62
- System Related Commands 63
- 1B 26 50 n1...n2 hex 65
- 27 38 80 n1...n2 decimal 65
- 1B 26 73 0A Hex 65
- 27 38 115 10 Decimal 65
- 1B 00 Hex 66
- 27 0 Decimal 66
- Status Reporting Commands 67
- 1B 05 02 hex 68
- 27 5 2 decimal 68
- 1B 05 04 hex 69
- 27 5 4 decimal 69
- 1B 05 05 hex 70
- 27 5 5 decimal 70
- 2. The printer is printing 71
- 1B 05 45 hex 74
- 27 5 69 decimal 74
- 1B 05 50 n1 hex 75
- 27 5 80 n1 decimal 75
- 1B 06 n1 hex 75
- 27 6 n1 decimal 75
- File Format 76
- Character Bitmap Data 77
- Printing 79
- 5. Print the printout 80
- Default Parameter Settings 81
- Default Value 82
- Examples 82
- Summary of Parameter Settings 83
- 0, 0 (0 mm) 83
- TTP model 84
- 2110 2130 84
- Serial Interface Set-up 85
- Print Setup 86
- Fixed Document Mode 89
- 0, 0 Min 90
- Cut Position Calibration 91
- Wall Compensation (mm) 91
- Printable Area 98
- Page Setup 100
- Simple Calibration Process 101
- FF (Form Feed) 102
- Interface 103
- Setup Options 104
- Parameter Options 104
- USB, TTP 2130 105
- Maintenance 107
- Symptom Suggested Actions 108
- 1. Open the printhead 109
- Firmware 110
- Firmware Identification 111
- Maintenance 112
- Specifications 113
- Ticket Specifications 114
- TOF Detection 115
- Print Module 116
- Ticket Separation 116
- Presenter 116
- Electronics 116
- Text Mode 117
- Miscellaneous 117
- Basic Character Set 118
- Printers 119
- Accessories 119
- Item NA/LA/AP EMEA 119
- Dimensions 120
- Media Holder 121
- 70W Power Supply 122
- 中国 RoHS 材料声明 123
- (China RoHS Material 123
- Declaration) 123
- BM sensor, 95 125
Manuais e produtos relacionados com Digitalizar e Imprimir Zebra TTP2130
Digitalizar e Imprimir Zebra KR403 Especificações
(158 páginas)
(158 páginas)
(82 páginas)
Digitalizar e Imprimir Zebra R402 Guia do Utilizador
(72 páginas)
(72 páginas)
Digitalizar e Imprimir Zebra R-140 Guia do Utilizador
(126 páginas)
(126 páginas)
(20 páginas)
Digitalizar e Imprimir Zebra 243 Guia do Utilizador
(53 páginas)
(53 páginas)
Digitalizar e Imprimir Zebra Z6M Especificações
(168 páginas)
(168 páginas)
Digitalizar e Imprimir Zebra TTP7030 Especificações
(144 páginas)
(144 páginas)
Digitalizar e Imprimir Zebra P310C Especificações
(84 páginas)
(84 páginas)
Digitalizar e Imprimir Zebra EPL2 Especificações
(154 páginas)
(154 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais