Zebra ZebraNet RZ Series Especificações descarregar pdf (Página 52)

HC100

Select a Site for the Printer

P1050133-002 5/31/12

Select a Site for the Printer

Consider the following when selecting an appropriate location for your printer.

Select a Surface

Select a solid, level surface of sufficient size and strength to accommodate the printer and

other equipment (such as a computer), if necessary. The choices include a table, countertop,

desk, or cart. For the printer’s weight and dimensions, see HC100 General Specifications

on page 53.

Provide Proper Operating Conditions

This printer is designed to function in a wide range of environmental and electrical conditions,

including a warehouse or factory floor. For more information on the required conditions, see

HC100 General Specifications on page 53.

Table 5 shows the temperature and relative humidity requirements for the printer when it is

operating.

Allow Proper Space

The printer should have enough space around it for you to be able to open the media door. To

allow for proper ventilation and cooling, leave open space on all sides of the printer.

Provide a Data Source

If the printer will be located away from the data source (such as a computer), the selected site

must provide the appropriate connections to that data source. For more information on the

types of communication interfaces and their limitations, refer to your printer’s user guide.

Provide a Power Source

Place the printer within a short distance of a power outlet that is easily accessible.

Table 5 •

Mode Temperature Relative Humidity

Thermal Transfer 41° to 104° F

5° to 40° C

20 to 85% non-condensing.

Direct Thermal 32° to 104° F

0° to 40° C

20 to 85% non-condensing

Caution • Do not place any padding or cushioning material behind or under the printer

because this restricts air flow and could cause the printer to overheat.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Sem comentários

Zebra ZebraNet RZ Series Especificações Página 52