Zebra 105SL Plus Guia do Utilizador descarregar pdf (Página 106)

Configuration

Control Panel Parameters

11342L-001 Rev. A 105SL User Guide 6/30/06

Print Server LCD Displays

The menu options shown in Table 10 display only if you have a print server installed.

Table 10 • Print Server Parameters (Page 1 of 4)

Parameter Action/Explanation

Load LAN Source

This parameter, which serves the same function as the ^NP ZPL command,

specifies whether to use the printer’s or the print server’s IP settings at

bootup.

Default: PRINTER

Selections: PRINTER, PRINTSERVER

To change the value shown:

1. Press PLUS () or MINUS (–) to toggle between the options.

Check for Wired PrintServer

This parameter, which serves the same function as the ^NB ZPL command,

tells the printer whether to search for a wired print server at bootup.

Default: NO

Selections: YES, NO

To change the value shown:

1. Press PLUS () or MINUS (–) to toggle between the options.

Specify IP Protocol

Allows either the user (permanent) or the server (dynamic) to select the

IP address. If a dynamic option is chosen, this selection determines the

method(s) by which the print server (wired or wireless) receives the IP

address from the server.

Default: ALL

Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP,

DHCP AND BOOTP, PERMANENT

Note • Use of GLEANING ONLY is not recommended when the

Wireless Print Server is installed.

To change the value shown:

1. Press PLUS () or MINUS (–) to scroll through the options.

1 Appears only when the ZebraNet Wireless Print Server is installed.

2 These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the

print server is recognized, all zeroes (000.000.000.000) will display until the printer obtains an IP address or defaults to

address 192.168.254.254.

3 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.

LOAD LAN FROM?

PRINTER

WIRED PS CHECK?

IP PROTOCOL

ALL

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 173 174

Comentários a estes Manuais

Sem comentários

Zebra 105SL Plus Guia do Utilizador Página 106

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Zebra 105SL Plus