Zebra ZE500 Guia do Utilizador descarregar pdf (Página 35)

Introduction

Control Panel Display

8/23/12 P1051584-002

Set the Real-Time Clock (RTC) Date

This parameter allows you to set the date to display in the Idle

Display.

See RTC Date on page 88 for more information.

Set the Real-Time Clock (RTC) Time

This parameter allows you to set the date to display in the Idle

Display.

See RTC Time on page 88 for more information.

Run the Specified ZBI Program*

• To run the ZBI program selected by the previous menu item,

press PLUS (+).

• If you did not replace the ribbon, press MINUS (-) to select

CANCEL, or press the LEFT ARROW or RIGHT ARROW

to move to another parameter.

See Run a ZBI Program on page 88 for more information.

* This menu item appears only if ZBI is enabled on your printer

and no ZBI program is running.

Select the Primary Network Device

This parameter determines which device should be considered

primary in the active device selection.

See Primary Network on page 89 for more information.

View if IP Settings Are Loaded from the Printer or Print

Server

This parameter tells whether to use the print engine’s or the print

server’s LAN/WLAN settings at power-up. The default is to use

the print engine’s settings.

See Load from External Device on page 89 for more information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 169 170

Sem comentários

Zebra ZE500 Guia do Utilizador Página 35