Zebra Cameo series Guia do Utilizador descarregar pdf (Página 22)

O-16

UMAN-CM2/3

logo on the lower left corner of the keypad.

• By means of a wireless LAN (Local Area Network)

(Cameo 3 Network Printers only) Cameo 3 Net-

work printers are identified by a “Cameo 3N” logo,

and an extension to the bottom cover.

Cable Communications

All Cameo printers can communicate by cable; the

specific cable supplied with your printer will vary with the

host terminal. The 8- pin circular connector on your

communications cable plugs into the serial communica-

tions port on the side of the Cameo printer. (Refer to the

Specifications Section of this manual for communications

port pin assignments.)

The connector is keyed to assure correct alignment; do

not try to force it if it does not plug in. The other end of

the cable must be plugged into the host terminal. Com-

munications between the terminal and the printer is

controlled by the applications running on the terminal and

the printer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Sem comentários

Zebra Cameo series Guia do Utilizador Página 22