Zebra Eltron Card Printer Manual do Utilizador descarregar pdf (Página 39)

980261-001 Rev. B

APPENDIX A - MAGNETIC CARD

STRIPE ENCODER

Operation and maintenance requirements for the P310 Printer with the optional

magnetic card stripe encoder.

(See Chapter 2 for location).

The magnetic encoder can be set for either high or low coercivity.

The magnetic encoder is a factory installed item with the

read/write head positioned below the card path, available

with HICO encodingor LOCO encoding.

When loading cards into the Card Cartridge, please ensure

the magnetic stripe is facing towards the printer and closest

to the rear.

Also available are Printer models with the Magnetic Read/

Write head positioned above the card path, with HICO

encoding or LOCO encoding.

When loading cards, please ensure the magnetic stripe.

ONLY USE cards that comply with ISO 7810 &

7811 standards for magnetic stripe cards. The

magnetic stripe must be flush to the surface of the

card to work properly. Never use taped-on

magnetic stripes.

Approved HICO & LICO PVC cards are available. (See Appendix C.)

SAMPLE ENCODING PROGRAM

Refer to Programmer's manual (Part number 980081-001)

STRIPE

DOWN

STRIPE

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46

Sem comentários

Zebra Eltron Card Printer Manual do Utilizador Página 39