Zebra TTPM3 Especificações Página 89
- Página / 112
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
88
Error Codes and Status Reporting
Security Additions
01/06/2009 TTPM3 Installation and Programming Manual P1003642-001
Security Additions
Status reporting is used as a security measure to ensure that no manipulation has occurred that
makes it possible to issue more tickets than intended.
If “Auto Clear at Startup” is enabled (parameter 8) the printer it looks for any unfinished
ticket, voids it, and then issues an
NAK G error code to inform about this.
If “Character sent after print” is selected (parameter 31) the printer issues that character, for
example
ETX (03H), to tell that the print cycle has been completed.
A transaction string can be appended to the ticket data using the
!Q command. The string is
stored in nonvolatile memory when the 03H is issued. This string can be read by the
!V
command, but there is no way to change the string other than issuing a new ticket.
During printing, a byte-counter is incremented and stored in the RAM. The counter starts at
zero, and when the ticket is ready the counter has reached 5BE0h, which is 23520.
Dividing the byte counter value by the number of pixels on a line (384) gives the current pixel
line. When the ticket is completed, we have printed bytes of pixel lines in the y-direction.
61.25 x 8 = 490 pixel lines. You have 5.7 pixel lines/mm. mm which is one ticket length.
Should a power failure occur, before the counter reaches the full value (5BE0h) you can
analyze the counter value to see if the ticket was as ready enough to pass as a usable ticket. In
such case you should not issue a new ticket unless you get the
NAK G that shows that the
almost ready ticket has been voided.
A critical error status message informs the host computer if something happens in the printer
that requires the operator to power it off.
61.25
384
23520
=
68
5.7
490
=
- Zebra® TTPM3 1
- Installation and 1
- Programming Manual 1
- Contents 3
- Document Printing 8
- Magnetic Encoding 8
- Document Handling 8
- Introduction 10
- Contacts 10
- Installation 11
- Installing a Desktop Printer 13
- Output Tray or Nozzle? 15
- Socket: AMP No. 350689-1 17
- Operation 19
- Keyboard 20
- Paper Stock Positioning 21
- Paper Loading 22
- Paper Jam Removal 23
- Self Test 24
- Repeat Fixed Print 24
- TTPM3 Start-up 25
- Power Failure Cleanup 25
- Start-up Synchronization 25
- Normal Operation 26
- Single-ticket Handling 27
- Inserting a Single Ticket 28
- Read and Decode 28
- Encode and Print 29
- Ejecting the Ticket 29
- Programming 31
- Graphics 33
- Bar Codes 34
- Magnetic Codes 34
- Triggering a Printout 35
- Command Acknowledgment 35
- Additional Commands 35
- Ticket Memory 35
- Encode Binary Data on Track 1 36
- System Commands 37
- Document Entry Commands 38
- Print-data Commands 38
- Storage Commands 39
- Command Reference 41
- !Z 20 <CR><LF> 44
- Feed- acceleration and speed 45
- Example • 45
- Error code Error 47
- Print Related Commands 49
- Text Printing 50
- Graphics Printing 51
- Printing Bar Codes 53
- Example 2 • Code 39 example 54
- Example 3 • Code 128 example 54
- Canceling a Ticket 55
- Encoding 57
- Checksum 59
- Reading and Decoding 60
- What Can You Encode? 61
- Font Loading 68
- Logotypes 69
- Ticket Examples 70
- Printing Bold Text 73
- Reversed Text 73
- Text Attributes 74
- Default Parameter Settings 75
- Default Value 76
- Examples 76
- Summary of Parameter Settings 77
- Restore Factory Default 78
- Parameter Reference 79
- Sets burn time 27 80
- Silent 80
- Enabled 80
- Sets 400 steps/second 82
- Sets 4000 steps/second 82
- Sets 1000 steps/second 82
- Error Codes and Status 87
- Reporting 87
- ENQ” (05H), and !S commands 88
- Security Additions 89
- Extended acknowledgement 91
- Maintenance 93
- Fault Finding 94
- Cleaning the Print Head 95
- Firmware 95
- Setup Options 98
- Communications Protocol 98
- Communications Cable 99
- Ticket Base Material 100
- Coating and Preprint 101
- Magnetic Media 101
- Document Stock 102
- Specifications 102
- TTPM3 Accepted Sizes 103
- Equal Distance Between Tabs 104
- Tickets with 45° Cut Corners 105
- Firmware Versions 106
- Firmware History 106
- FW Version TTPM2 TTPM3 106
- FW revision Change 106
Manuais e produtos relacionados com Digitalizar e Imprimir Zebra TTPM3
Digitalizar e Imprimir Zebra EM 220 Especificações
(67 páginas)
(67 páginas)
Digitalizar e Imprimir Zebra 105Se Especificações
(110 páginas)
(110 páginas)
Digitalizar e Imprimir Zebra CPCL Especificações
(70 páginas)
(70 páginas)
Digitalizar e Imprimir Zebra TTPM2 Especificações
(140 páginas)
(140 páginas)
(86 páginas)
Digitalizar e Imprimir Zebra CPCL Especificações
(497 páginas)
(497 páginas)
Diodes AP78L05/08/12 manuály
Uživatelské manuály a uživatelské příručky pro Hardware Diodes AP78L05/08/12.
Poskytujeme 1 manuály pdf Diodes AP78L05/08/12 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais