Zebra ZXP Series 7 Manual do Utilizador descarregar pdf (Página 124)

120 Zebra ZXP Series 3 Card Printer User’s Manual P1058486-002

E: CardSense Single Card Feed Mode

Installing the CardSense Single Card Feed Kit

Step 1. Turn printer power OFF.

Step 2. Open the lid, and remove the ribbon cartridge.

Step 3. Install the black roller. Place it between the blue clips just behind the card entry slot,

and press the roller straight down so it is fully seated.

Step 4. While holding the roller down, turn power ON. You will hear a loud click as the

clips secure the roller.

Step 5. At this point, let go of the roller, and then turn printer power OFF.

Step 6. Open the Cleaning Cartridge. The new Cleaning Cartridge will contain a Cleaning

Roller with its protective wrapping.

Important • Make sure the Card Hopper remains closed.

New Cleaning

Roller with

Protective

Wrapping

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 133 134

Sem comentários

Zebra ZXP Series 7 Manual do Utilizador Página 124