Zebra ZXP Series 7 Manual do Utilizador descarregar pdf (Página 39)

3: Printer Setup

Loading Cards

P1058486-002 Zebra ZXP Series 3 Card Printer User’s Manual 35

Step 2. Open the card feeder cover.

Step 3. Slide the card guide all the way to the right until it locks in place with an

audible click.

Step 4. Remove the wrapper from the card stack.

Step 5. Examine the cards, and discard any cards with damaged edges.

Step 6. Holding the card stack by its sides, fan the cards (like flexing a deck of playing

cards) at least once from each end, so as to separate all the cards.

Step 7. Restore the card stack to its original squared-off condition.

Step 8. Place the stack of cards into the card feeder. When loading magnetic stripe cards

or contact smart cards, see Appendix B or Appendix C respectively for proper

card orientation.

Step 9. Close the card feeder cover. When card feeder cover is closed, the card guide locking

mechanism will be released automatically.

Caution • Hold the cards by the edges only. DO NOT touch print surfaces as this can

reduce print quality.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 133 134

Sem comentários

Zebra ZXP Series 7 Manual do Utilizador Página 39