Zebra Wireless Print Server Guia do Utilizador Página 49
- Página / 228
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
49
Wireless Status and Settings
View or Change Wireless Parameters on the LCD
4/29/08 Wireless User Guide 14143L-005 Rev. A
LOAD LAN FROM?
1
View if IP Settings Are Loaded from the Printer or Print Server
This parameter, which serves the same function as the
^NP ZPL command,
tells if the printer uses IP settings from the printer or the print server at
bootup.
Selections: PRINTER, PRINTSERVER
Default Value: PRINTER
IP PROTOCOL
2
View or Change the Method to Obtain an IP Address
This parameter tells if the user (permanent) or the server (dynamic) selects
the IP address. If a dynamic option is chosen, this parameter tells the
method(s) by which the print server (wired or wireless) receives the IP
address from the server.
Selections: ALL, BOOTP, DHCP, DHCP AND BOOTP, PERMANENT
Default Value: All
IP ADDRESS
2
View the Printer’s IP Address
Default Value: 0.0.0.0
SUBNET MASK
2
View the Subnet
Default Value: 255.255.255.0
DEFAULT GATEWAY
2
View the Gateway
Default Value: 0.0.0.0
MAC ADDRESS
2,3
View the Wireless Radio Card’s MAC Address
Each wireless radio card has a permanent and unique Media Access Control
(MAC) address assigned to it. This parameter shows the MAC address for
the current wireless radio card.
Default Value: 000000000000
ESSID
1,2,3
View the ESSID Value
The Extended Service Set Identification (ESSID) is an identifier for your
wireless network. This parameter shows the ESSID for the current wireless
configuration.
Default Value: 125
WLAN SECURITY
1,3
View the WLAN Security Type
This parameter displays the current security type. To change the value
shown, use ^WX on page 115 or wlan.security on page 192.
RESET NETWORK
1,3
Reset the Wired or Wireless Network
Use this parameter to reinitialize the wireless radio card and the print server
(wired or wireless) when the wireless print server is running. This
parameter also causes any wireless radio card in the printer to reassociate to
the wireless network. (Same function as ZPL command ~WR on page 112.)
1 Appears only when the ZebraNet Wireless Print Server is installed.
2 Appears after the printer recognizes the existence of a ZebraNet print server (wired or wireless). All zeroes
(000.000.000.000) display until the printer obtains an IP address or defaults to address 192.168.254.254.
3 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.
Table 10 • Wireless Parameters for V60.15.x, R6x.15.x, ZSPx, or later Firmware (Continued)
Parameter
Function
- ZebraNet 1
- Wireless User Guide 1
- Contents 3
- Section Description 10
- Contacts 11
- Document Conventions 12
- About This Document 13
- Introduction 15
- Hardware 16
- Firmware 16
- Access Point 19
- Technologies 20
- Systems 21
- Supported Security Types 22
- Security Type Supported? 23
- Wireless Plus Print Server 25
- = Active Print Server 25
- Wireless Print Server 25
- Configuration 29
- Any Other Wireless Printer 32
- 7. Click Next 33
- PSK Type to String 34
- PSK Name field 34
- Click OK 35
- To... Then 36
- Save Script to a file 37
- Wireless Radio Card 38
- 5. Turn on (I) the printer 39
- 6. Turn on (I) the printer 41
- Wireless Status 43
- Plus (+) for 105SL 44
- Status Indicator Meaning 44
- SIGNAL STRENGTH and 45
- SIGNAL QUALITY 45
- Network Configuration Label 46
- PAUSE/FEED 47
- Function 48
- WIRED PS CHECK? 48
- ^NP ZPL command 49
- PRIMARY NETWORK 50
- LOAD FROM EXT? 50
- ACTIVE PRINTSRVR 50
- IP PROTOCOL 50
- Parameter 51
- RESET NETWORK 52
- Parameter Explanation 53
- Wireless Status and Settings 55
- Troubleshooting 57
- Wireless Error Messages 58
- General Issues 58
- DEFAULT NET 59
- IP Issues 61
- WebView Web Pages 63
- IP ADDRESS 64
- Home Page 65
- View Printer Configuration 66
- 3. Click Submit Changes 67
- 4. Click on the statement 67
- Network Configuration Menu 69
- Print Listings on Label 69
- Media Setup Calibration 70
- ZPL Control Advanced Setup 71
- Network Configuration Screens 72
- SMTP TCP/IP 74
- X60.15.x and ZSPx 74
- Directory Listing 77
- Click Edit 79
- Button Function/Operation 80
- Alert Setup 81
- Printer Controls 84
- Button Function 85
- Print Server Settings 86
- Print Server: 88
- TCP/IP Configuration 88
- TCP/IP Logical Printing Ports 88
- Cancel Job 90
- View Configuration Sheet 91
- View Port Status Contact 91
- ZPL Commands 93
- Parameters Details 100
- Format ~WL 109
- Region Channel Mask 114
- Configure Wireless Securities 115
- Security Type 03: WEP 128-Bit 119
- Security Type 02: WEP 40-Bit 119
- Security Type 04: EAP-TLS 120
- Security Type 05: EAP-TTLS 120
- Security Type 06: EAP-FAST 120
- Security Type 07: PEAP 121
- Security Type 08: LEAP 121
- Security Type 09: WPA PSK 121
- Security Type 10: WPA EAP-TLS 122
- Security Type 13: WPA PEAP 123
- Security Type 14: WPA LEAP 123
- Security Type 15: Kerberos 123
- SGD Wireless Commands 125
- Overview 126
- Do commands: 127
- Command Structure 128
- Commands Details 129
- Security Type 2: WEP 40-Bit 194
- Security Type 3: WEP 128-Bit 195
- Security Type 4: EAP-TLS 195
- Security Type 5: EAP-TTLS 196
- Security Type 6: EAP-FAST 196
- Security Type 7: PEAP 197
- Security Type 8: LEAP 197
- Security Type 9: WPA PSK 197
- Glossary 217
- © 2008 ZIH Corp 228
Manuais e produtos relacionados com Servidores de impressão Zebra Wireless Print Server
Servidores de impressão Zebra II Especificações
(262 páginas)
(262 páginas)
Servidores de impressão Zebra 10/100 Guia do Utilizador
(132 páginas)
(132 páginas)
Servidores de impressão Zebra II Especificações
(412 páginas)
(412 páginas)
Servidores de impressão Zebra 10/100 Guia do Utilizador
(162 páginas)
(162 páginas)
Ag Leader Technology manuals
The list of Ag Leader Technology product deivces contains 5 user manuals and guides for 3 models in 3 type of devices
Comentários a estes Manuais