Zebra S600 Especificações descarregar pdf (Página 20)

12 Zebra S400 & S600 User’s Guide

9. Adjust all of the guides:

• Push the media supply guide inward until it is just touching the

outer side of the media supply roll, then lock the guide in place with

its locking screw. The guide must not cause pressure or excessive

drag on the media supply roll.

• Adjust the outer edge guides on both the lower guide rod and the

platen guide rod until they just touch the outer edge of the media

and backing without causing the material to buckle.

• Adjust the media guide until it just touches the outer edge of the

media without causing the material to buckle.

10. See “Adjusting the Media Sensor” on page 18 to adjust the media

sensor.

NOTE: In the Peel-Off mode, proper media tracking is critical.

Refer to “Backing Rewind Power Roller Adjustment” on page 42

to make sure that the media tracks properly through the printer.

Figure 9. Loading — Peel-Off Mode

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 93 94

Sem comentários

Zebra S600 Especificações Página 20