Zebra S600 Especificações descarregar pdf (Página 64)

56 Zebra S400 & S600 User’s Guide

$GGLWLRQDO3ULQWHU6HOI7HVWV

These self tests produce sample labels and provide specific information

that help the operator determine the operating conditions for the printer.

Each self test is enabled by holding in a specific front panel button while

turning the power switch on. Keep the button depressed until the

CALIBRATE LED goes out. When the Power-On Self Test is complete,

the selected printer self test automatically starts. To return to printing

mode, turn off and then turn on the printer.

NOTE: When performing self tests, disconnect all

communications interface cables from the printer.

NOTE: When canceling a self test before its actual completion,

always turn the printer power switch off and then back on.

NOTE: When performing these self tests while in the Peel-Off

mode, the operator must remove the labels as they become

available.

NOTE: When the cutter option is installed and enabled, the labels

printed in these self tests should be automatically cut as they are

printed.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 93 94

Sem comentários

Zebra S600 Especificações Página 64