Zebra CPCL Especificações descarregar pdf (Página 327)

100

101

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-101

continued

ip.netmask

type: getvar; setvar

This parameter refers to the subnet mask address. This value is ignored if DHCP is enabled.

getvar result This will return the printer’s subnet mask.

Example

Description This command instructs the printer to respond with the subnet

mask

Syntax ! U1 getvar “ip.netmask”

Result “255.255.255.0”

setvar choices

Any valid netmask.

Default “255.255.255.0”

Example

Description This command instructs the printer to change the subnet mask to

255.255.0.0

Syntax ! U1 setvar “ip.netmask” “255.255.0.0”

Result The subnet mask will be set to 255.255.0.0 upon cycling the

power or issuing the device.reset command

ip.ping_remote

type: do

This parameter directs the printer to ping a specified address “x” number of times. The address to be

pinged is set by setvar ip.remote.

do parameters ip address; number of times to ping

Example

Description This command instructs the printer to ping the address set by the

ip.remote parameter ten times

Syntax ! U1 do “ip.ping_remote “10”

Result Printer creates a report similar to the following:

Pinging 10.14.4.162 10 times

Results: 10 of 10 succeeded

Min:20 Max:40 Avg:22 (min/max times in mSec.)

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 496 497

Comentários a estes Manuais

Sem comentários

Zebra CPCL Especificações Página 327

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Zebra CPCL