Zebra ZebraNet Guia do Utilizador Página 39
- Página / 136
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
39
Getting Started
Using the Control Panel to View and Modify Print Server Parameters
08/27/2007 ZebraNet
®
10/100 Internal Print Server 14197L-002 Rev. A
for ZM400, ZM600, GK420 and GX420/430 User Guide
Using the Control Panel to View and Modify Print
Server Parameters
You may change several print server parameters using the control panel on the printer. Table 5
shows the parameters that may be viewed or modified through the printer’s control panel for
ZM400 and ZM600 printers with firmware version V53.15.x or later.
Table 5 • Print Server Parameters
Parameter
Function
LIST NETWORK Print a Network Configuration Label
Use this parameter to print a network configuration label (see Figure 9
on page 37).
IP PROTOCOL
1
View the Method to Obtain an IP Address
This parameter tells if the user (permanent) or the server (dynamic) selects
the IP address. If a dynamic option is chosen, this parameter tells the
method(s) by which the print server (wired or wireless) receives the IP
address from the server.
Selections: ALL, BOOTP, DHCP, DHCP AND BOOTP, PERMANENT
Default Value: All
IP ADDRESS
1
View the Print Engine’s IP Address
Default Value: 0.0.0.0
SUBNET MASK
1
View the Subnet
Default Value: 255.255.255.0
DEFAULT GATEWAY
1
View the Gateway
Default Value: 0.0.0.0
RESET NETWORK
1
Reset the Wired or Wireless Network
Use this parameter to reinitialize the wireless radio card and the print server
(wired or wireless) when the wireless print server is running. This
parameter also causes any wireless radio card in the printer to reassociate to
the wireless network.
ACTIVE PRINTSRVR
View the Active Print Server
Selections: Wired, Wireless
Default Value: Wired
PRIMARY NETWORK
View the Primary Network
Default Value: Internal Wired
1 These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the
print server is recognized, all zeroes (000.000.000.000) will display until the printer obtains an IP address or defaults to
address 192.168.254.254.
- User Guide 1
- Contents 3
- Who Should Use This Document 8
- Web Site 9
- The Americas 9
- Asia Pacific 9
- Document Conventions 10
- About This Document 11
- Related Documents 12
- Introduction 13
- Components 14
- Overview 15
- Firmware 16
- Software 16
- Browser Support 17
- Protocols 17
- Hardware 17
- Compatibility 18
- General Specifications 19
- 10/100 Internal Print Server 21
- Status and Configuration 22
- Open a Web browser 23
- The Printer Home Page opens 23
- Figure 2 • Printer Home Page 23
- Print Server Settings 24
- Print Server 25
- Use this feature to set the 26
- Use this 26
- 10/100 Internal PS Features 27
- Print Server Status 30
- The Port Status page opens 31
- Figure 6 • Port Status 31
- Reset Print Server 32
- Submit Changes 33
- Getting Started 35
- Before You Begin 36
- Server Parameters 39
- Setup/Exit two times 40
- Plus (+ key) five times 40
- WebView 41
- ZebraNet View 42
- Without DHCP 43
- H/W address column and 44
- Setting the Subnet 45
- In a Non-Windows Environment 46
- IP RESOLUTION must 46
- Static Route 47
- Gleaning 48
- Installation 49
- 10/100 Internal PS 50
- Click Next 51
- Install 53
- 7. You have these options: 56
- ZebraLink WebView 57
- Home Page 58
- View Printer Configuration 59
- If... Then 61
- Home link 61
- Password: 1234 63
- Table 6 • Menu Options 65
- General Setup 65
- Serial Communications Setup 65
- • TCP/IP Settings 66
- Media Setup 67
- Calibration 67
- ZPL Control 68
- Advanced Setup 68
- Network Configuration 71
- Primary/Secondary Settings 72
- Save Current Configuration 73
- TCP/IP Settings 74
- Click TCP/IP Settings 77
- (ZM400/ZM600 Web Page Shown) 77
- Printer Controls 79
- Directory Listing 80
- Alert Setup 81
- Figure 36 • Printer Home Page 83
- Add Alert Message 84
- Destination to Email 86
- 10. Click Add Alert Message 87
- 1. Open a Web browser 88
- Configuring the Print Server 91
- POP3 E-mail Printing 95
- Print Server Configuration 99
- ZebraNet Alert 100
- ZebraNet Alert Using SNMP 101
- Open ZebraNet Alert 102
- Setting Alerts 103
- ZebraNet Utilities 105
- Figure 53 • ZebraNet View 106
- ZebraNet View Java Applet 108
- Begin Search 109
- ZebraNet Connect IP 110
- Windows 95/98/Me 111
- 8. Click Add 112
- Hardware Troubleshooting 113
- Troubleshooting the 10/100 PS 114
- LED State Description 115
- Unable to Print 116
- Unable to Configure Device 117
- Print Protocols 119
- 12.3.4.123, you 120
- Print Queues 121
- Configuring the Print Queue 122
- Prerequisites 123
- Spool Print Job Configuration 123
- System V Queue Installation 124
- Frequently Asked Questions 125
- Glossary 129
- 08/27/2007 ZebraNet 133
- 14197L-002 Rev. A ZebraNet 134
- © 2007 ZIH Corp 136
Manuais e produtos relacionados com Digitalizar e Imprimir Zebra ZebraNet
Digitalizar e Imprimir Zebra ZebraNet Guia do Utilizador
(124 páginas)
(124 páginas)
Digitalizar e Imprimir Zebra RZ400 Guia do Utilizador
(156 páginas)
(156 páginas)
Digitalizar e Imprimir Zebra EM 220 Especificações
(53 páginas)
(53 páginas)
Digitalizar e Imprimir Zebra GK420d Guia do Utilizador
(102 páginas)
(102 páginas)
Digitalizar e Imprimir Zebra QL Guia do Utilizador
(56 páginas)
(56 páginas)
Digitalizar e Imprimir Zebra TTP2130 Especificações
(132 páginas)
(132 páginas)
Digitalizar e Imprimir Zebra KR403 Especificações
(158 páginas)
(158 páginas)
(82 páginas)
Digitalizar e Imprimir Zebra R402 Guia do Utilizador
(72 páginas)
(72 páginas)
Digitalizar e Imprimir Zebra R-140 Guia do Utilizador
(126 páginas)
(126 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.022 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais