Zebra ZebraNet Guia do Utilizador descarregar pdf (Página 46)

Getting Started

Assigning an IP Address

14197L-002 Rev. A ZebraNet

10/100 Internal Print Server 08/27/2007

for ZM400, ZM600, GK420 and GX420/430 User Guide

Setting the Default Gateway

These steps are optional.

To set the default gateway, complete these steps:

1. From the ZebraNet View menu bar, select PrintServer > Configuration.

2. Click the TCP/IP tab.

3. From the Print Server Configuration > TCP/IP tab, in the Default Gateway text-box, type

in your default gateway.

4. Confirm it is accurate, and click OK.

In a Non-Windows Environment

These steps can be used to assign an IP address using the control panel (LCD).

Assigning an IP address from the printer LCD

To assign an IP address from the printer LCD, complete these steps:

1. Turn on (I) the printer and wait until the LCD says PRINTER READY. If you do not have

a network cable in the port, the 10/100 Internal PS prints the configuration label when it is

ready.

2. On the printer control panel, press SETUP/EXIT.

3. On the printer control panel, press PREVIOUS until you reach the NETWORK SETTINGS

menu item.

4. You can edit any of the following network settings in order to communicate with any

10/100 Internal PS in your network environment.

• ip resolution (dynamic, permanent): The printer menu item IP RESOLUTION must

be set to

PERMANENT if attempting to assign the IP address from the control panel.

• default gateway (default setting of 000.000.000.000)

• subnet mask (default setting 255.255.255.0)

• ip address (if initial default setting is 0.0.0.0, after 2 minutes this defaults to

192.168.254.254)

• ip protocol (gleaning only, RARP, BOOTP, DHCP, DHCP and BOOTP, all)

Important • To change any of these settings, you need to enter the printer password. The

default password is

1234.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Sem comentários

Zebra ZebraNet Guia do Utilizador Página 46