Zebra TTPM3 Especificações Página 85
- Página / 112
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
84
Default Parameter Settings
Parameter Reference
01/06/2009 TTPM3 Installation and Programming Manual P1003642-001
An ASCII character can be returned to the host after a completed ticket generation.
This parameter adjusts the transition between short and long ticket.
The start of print is measured from the rear edge of the ticket and this parameter can be used to
adjust the start of print.
Length of ticket in fixed length mode. Fix length means that there is no gaps or black marks to
control cut. The printer counts steps from the leading edge of the ticket and cuts when fed to
the setting of this parameter.
The printer counts steps from the middle of the black mark, and cuts when fed to the setting of
this parameter.
This parameter is used if the width parameter in the !F command is set to 1.
31
0Default
Character sent after print
32 Min
255 Max
!H P 31 3 The character 03h (ETX) will be sent by TTPM when the last pixel line
of the ticket has been printed.
32
94 Default
Long ticket length
0 Min
255 Max
Caution • Do not change unless you are told by Zebra Technical Support to do so.
33
10 Default
Top Margin, short ticket
0 Min
255 Max
34
123 Default
Fixed ticket length
32 Min
255 Max
35
196 Default
Feed after black mark in black mark mode
32 Min
255 Max
36
12 Default
Character pitch for font 1
1 Min
16 Max
Note • See also !F T on page 49.
- Zebra® TTPM3 1
- Installation and 1
- Programming Manual 1
- Contents 3
- Document Printing 8
- Magnetic Encoding 8
- Document Handling 8
- Introduction 10
- Contacts 10
- Installation 11
- Installing a Desktop Printer 13
- Output Tray or Nozzle? 15
- Socket: AMP No. 350689-1 17
- Operation 19
- Keyboard 20
- Paper Stock Positioning 21
- Paper Loading 22
- Paper Jam Removal 23
- Self Test 24
- Repeat Fixed Print 24
- TTPM3 Start-up 25
- Power Failure Cleanup 25
- Start-up Synchronization 25
- Normal Operation 26
- Single-ticket Handling 27
- Inserting a Single Ticket 28
- Read and Decode 28
- Encode and Print 29
- Ejecting the Ticket 29
- Programming 31
- Graphics 33
- Bar Codes 34
- Magnetic Codes 34
- Triggering a Printout 35
- Command Acknowledgment 35
- Additional Commands 35
- Ticket Memory 35
- Encode Binary Data on Track 1 36
- System Commands 37
- Document Entry Commands 38
- Print-data Commands 38
- Storage Commands 39
- Command Reference 41
- !Z 20 <CR><LF> 44
- Feed- acceleration and speed 45
- Example • 45
- Error code Error 47
- Print Related Commands 49
- Text Printing 50
- Graphics Printing 51
- Printing Bar Codes 53
- Example 2 • Code 39 example 54
- Example 3 • Code 128 example 54
- Canceling a Ticket 55
- Encoding 57
- Checksum 59
- Reading and Decoding 60
- What Can You Encode? 61
- Font Loading 68
- Logotypes 69
- Ticket Examples 70
- Printing Bold Text 73
- Reversed Text 73
- Text Attributes 74
- Default Parameter Settings 75
- Default Value 76
- Examples 76
- Summary of Parameter Settings 77
- Restore Factory Default 78
- Parameter Reference 79
- Sets burn time 27 80
- Silent 80
- Enabled 80
- Sets 400 steps/second 82
- Sets 4000 steps/second 82
- Sets 1000 steps/second 82
- Error Codes and Status 87
- Reporting 87
- ENQ” (05H), and !S commands 88
- Security Additions 89
- Extended acknowledgement 91
- Maintenance 93
- Fault Finding 94
- Cleaning the Print Head 95
- Firmware 95
- Setup Options 98
- Communications Protocol 98
- Communications Cable 99
- Ticket Base Material 100
- Coating and Preprint 101
- Magnetic Media 101
- Document Stock 102
- Specifications 102
- TTPM3 Accepted Sizes 103
- Equal Distance Between Tabs 104
- Tickets with 45° Cut Corners 105
- Firmware Versions 106
- Firmware History 106
- FW Version TTPM2 TTPM3 106
- FW revision Change 106
Manuais e produtos relacionados com Digitalizar e Imprimir Zebra TTPM3
Digitalizar e Imprimir Zebra EM 220 Especificações
(67 páginas)
(67 páginas)
Digitalizar e Imprimir Zebra 105Se Especificações
(110 páginas)
(110 páginas)
Digitalizar e Imprimir Zebra CPCL Especificações
(70 páginas)
(70 páginas)
Digitalizar e Imprimir Zebra TTPM2 Especificações
(140 páginas)
(140 páginas)
(86 páginas)
Digitalizar e Imprimir Zebra CPCL Especificações
(497 páginas)
(497 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais