Zebra TLP2824 Plus Guia do Utilizador descarregar pdf (Página 36)

Getting Started

Connecting the Printer to the Computer

980643-001 Rev. A TLP 2824 Plus™ User Guide 3/31/09

Connecting the Printer to the Computer

The Zebra 2824 Plus printers support a variety of interface options and configurations. These

include: Universal Serial Bus (USB) interface, RS232 Serial, Parallel (IEEE 1284.4) and

10/100 Ethernet.

Interface Cable Requirements

Data cables must be of fully shielded construction and fitted with metal or metallized

connector shells. Shielded cables and connectors are required to prevent radiation and

reception of electrical noise.

To minimize electrical noise pickup in the cable:

• Keep data cables as short as possible (6 foot [1.83 m] recommended).

• Do not tightly bundle the data cables with power cords.

• Do not tie the data cables to power wire conduits.

Caution • Keep the power switch in the OFF position when attaching the interface cable.

The power cord must be inserted into the power supply and the power receptacle on the

back of the printer before connecting or disconnecting the communications cables.

Important • This printer complies with FCC “Rules and Regulations,” Part 15, for Class B

Equipment, using fully shielded data cables. Use of un-shielded cables may increase radiated

emissions above the Class B limits.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 103 104

Sem comentários

Zebra TLP2824 Plus Guia do Utilizador Página 36