Zebra TLP2824 Plus Guia do Utilizador descarregar pdf (Página 61)

Printer Options

Cutter Option

3/31/09 TLP 2824 Plus™ User Guide 980643-001 Rev. A

Cutter Option

The printer has a factory installed media cutter option for full width cutting of label liner, tag

or receipt media. The type of cutter option installed in your printer can be verified by printing

a printer configuration status label. The cutter options are:

• A medium duty cutter for cutting label liner and light tag media (LINER/TAG)

Maximum Paper Weight (thickness): up to 180 g/m2 (0.0077 in.)

Life*: 2 million cuts: 0.5 mil to 5 mil stock (10-120 g/m2)

1 million cuts: 5 mil to 7.5 mil stock (120-180 g/m2)

750,000 cuts: 7.5 mil to 10 mil (180-200 g/m2)

* - Exceeding the maximum media weight (density/hardness) and thickness will

shorten the cutters usable life or can cause the cutter to fail (jam or other error).

• Cut Width: 2.25 inches (57.1 mm) maximum to 1 inches (25.4 mm) minimum

• Minimum distance between cuts (label length): 1 inch (25.4 mm). Cutting shorter

media lengths between the cuts may cause the cutter to jam or error.

• By default, the cutter operations include a self cleaning preventive maintenance

cleaning cut after every twenty-fifth cut. This feature can be disabled via ZPL or EPL

SGD (Set/Get/DO) programming command (

cutter.clean_cutter) but is not

recommended.

Warning • There are no operator serviceable parts in the cutter unit. Never remove the

cutter cover (bezel). Never attempt to insert objects or fingers in to the cutter mechanism.

Important • Tools, cotton swabs, solvents (including alcohol), etc. all may damage or shorten

the cutter’s usable life or cause the cutter to jam.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Sem comentários

Zebra TLP2824 Plus Guia do Utilizador Página 61