Zebra RW SERIES Especificações descarregar pdf (Página 16)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-16 •

Replacement Kit RK17393-001- RW 420 Media Cover

Installation Instructions

This kit includes the parts and documentation necessary to install the RK17393-001

Media Cover Kit in the RW 420 model printer. Read these instructions thoroughly

before attempting to install this kit.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

• 3/32” Hex Driver

• #0 or #1 Phillips Head Screw Driver

Cautions

 Caution•Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

• Remove media before installing this Replacement Kit.

Removing the Media Cover

1 Turn the printer off and remove the battery pack.

2 Press the latch release button and open the Media Cover. Remove any media

from the printer.

3 Remove the Upper Housing, referring to procedure for RK1793-008/RK18280-1.

Pivot the Upper Housing away from the Printer. You may elect to disconnect

the LCD and Keypad ex circuits form the CPU Board for ease of handling the

Printer.

Unplug the Bar

Sense Cable

from J2

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 113 114

Sem comentários

Zebra RW SERIES Especificações Página 16