Zebra RW SERIES Especificações descarregar pdf (Página 85)

• 2-85 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

Replacement Kits RK17949-008 & -009- RW 220

Keypad and Housing Kits

Installation Instructions

This kit includes the parts and documentation necessary to install the

RK17949-008 & RK17949-009 Keypad and Housing Kits, RW 220 in an RW 220

model printer. Read these instructions thoroughly before attempting to install this

kit.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

 Caution•Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

• Remove media before installing this Replacement Kit.

Remove the Upper Housing

1. Remove and retain the (5) screws at locations marked “A” from the bottom of

the Printer securing the Keypad and Housing to the printer.

2. Remove and retain the D-rings or the sleeves and carrying strap captured

between the Keypad and Housing and the lower housing.

continued on next page

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 113 114

Sem comentários

Zebra RW SERIES Especificações Página 85