Zebra RW SERIES Especificações descarregar pdf (Página 64)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-64 •

6. Remove the Printer Frame from the Lower Housing. (Refer to the procedure

for RK17974-007 for more details.) Carefully pivot the printer frame out of the

Lower Housing and lift the Media Cover clear of the Lower Housing .

Avoid putting excess strain on the remaining cables connected to the CPU Board.

7. Remove the Platen and Gear from the Media Cover Assembly. (Refer to the

procedure for RK17974-002 for more details)

8. Remove the Bar Sense Cable from the Printer Frame. Carefully peel the Bar

Sense Cable off the bottom of the Printer Frame.

9. Remove the Media Cover. Using a 3/32” hex driver, push the Hinge Pin out of

the Printer Frame, and then lift the Media Cover from the Printer Frame.

Peel the old Bar Sense

Cable away from the

printer Frame.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 113 114

Sem comentários

Zebra RW SERIES Especificações Página 64